Styles & Uses

API 610 Process Pumps

Designed to meet the 610 standard set by the American Petroleum Institute (API). API 610 standard for pumps for refineries, pipelines, and other hydrocarbon processing applications. The TDP® design includes end suction, horizontal, double case, multi stage, vertical cantilever and vertical sump pumps.

Chemical Slurry & Emulsion Pumps

Designed for abrasive and corrosive industrial materials and shear sensitive Latex Emulsions and Teflon Dispersions. The TDP® design includes close-coupled and long-coupled designs.

Dry Pit Pumps

Sewage and waste water pumps. The TDP® design includes vertical pedistal mounted designs, run in air submersibles, and special run submerged motos suitable for system upset.

Hydraulic Drive Pumps

The TDP® design allows for submerged or surface operation. Manufactured from A532 hard iron or many other alloys.

Mud Pumps

Built to transfer heavy sludge or mud. Some larger versions are used for pressure. They are sometimes used on oil rigs to pressurize and circulate fluid. The TDP® design includes close-coupled and long-coupled designs.

Multi-Stage High Pressure Slurry Pumps

Designed to transport pipeline slurries or viscous liquids, mine dewatering, crude oil, coal slurry mixture, etc. This diffuser-styled pump is generally manufactured from A352 hard iron suitable for thick, abrasive, or high solids slurries and is capable of sub-sea service.

Progressive Cavity Replacement

Replacement Disk pumps suitable for replacing PC pumps with no or minor pipe changes.

Sanitary Pumps 3-A

Pump used to transport fluids that must be processed for sanitary standards. They are designed to meet regulatory requirements. The TDP® design includes close-coupled and long-coupled designs.

Self Priming

With external primer suitable for trailer or skid mounting or with stationary priming chamber. The TDP® design includes end suction, close-coupled and long-coupled designs.

Sewage & Sludge Pumps

Pumps that are most often used to pump sewage to a waste treatment facility. The TDP® design includes close-coupled, long-coupled, submersible and vertical designs.

Slurry Pumps

Manufactured from A352 hard iron suitable for thick, abrasive or high solids slurries. The TDP® design includes end suction, horizontal multi-stage, vertical cantilever and vertical sump pumps.

Submersible Pumps

Designed to operate with both pump and motor submerged in the fluid being pumped. TDP® includes designs suitable for explosion proof and sub-sea service with pressure balanced motor designs.

Vertical Cantilever Pumps

A slurry pump manufactured for demanding standards with no bearings below the mounting plate and can run dry indefinitely with no damage. Total pump length (TPL) up to 10 ft.

Vertical Sump & Process Pumps

Applications include industrial process, sump drainage, corrosive liquids, pollution control, molten salts. Total pump length (TPL) up to 30 ft.

Viscous Liquid Pumps

Designed to accommodate continuous duty with viscous liquids. The TDP design includes end suction, horizontal multi stage, vertical cantilever and vertical sump pumps. This is one of many configurations of our industrial equipment pumps.


Waste Water Pumps

Pumps used to move wastewater toward or within a waste treatment facility. The TDP design includes end suction, horizontal multi stage, vertical cantilever and vertical sump pumps.

NEW**OH4 Inline